Welcome to The Queen Ring

Scales There are 42 products.

Metal scales, for armour or jewelry.

To make these scales into fabric for clothing or armour, the following rings are needed:
Large scales: 1.6x8.2 mm
Small scales: 1.2x5.0 mm
Mini scales: 0.8x2.8 mm

Stainless steel is best for this, since it is strongest. You will need about twice as many rings as scales.


Subcategories

  • Anodized aluminium...

    Shiny anodized tiny aluminium scales.

    Leaf-shaped, 12 mm long and 7,6 mm wide. The hole has a diameter of 3 mm.

    To connect these scales into sheets you'll need rings of 0,8x2,8 mm, at least two rings per scale.

  • Anodized aluminium...

    Small anodized sluminium scales. Leaf-shaped, 22.5 mm long and 13.9 mm wide, with a 5.6 mm hole.

    To connect these scales into sheets you'll need rings of 1.2 x 5.0  mm, at least two rings per scale.

  • Anodized aluminium...

    Large anodized aluminium scales. Leaf-shaped, 35.9 mm long and 22.6 mm wide, with an 8.9 mm diameter hole.

    To connect these scales into sheets you'll need rings of 1.6x8.2 mm, about two rings per scale.

  • Polycarbonate small...

    Small scales made of lightweight polycarbonate plastic.

    Leaf-shaped, 22.5 mm long and 13.9 mm wide, with a 5.6 mm hole.

    To connect these scales into sheets, use rings of at least 1.2x5.0 mm. You'll need at least two rings per scale.

  • Other scales

    Large and small scales of uncoloured aluminium, steel and bronze

per page
Showing 37 - 42 of 42 items
Showing 37 - 42 of 42 items